Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

A novel microwave assisted reverse micelle fabrication route for Th (IV)‐MOFs as highly efficient adsorbent nanostructures with controllable structural properties to CO and CH4 adsorption: Design,and a systematic study

Reducing gas contaminants by affordable and effective adsorbents is a major challenge in the 21^st century. In the present study, thorium metal organic framework (Th‐MOF) nanostructures are introduced as highly efficient adsorbents. These compounds were manufactured via a novel route resulting from the development of microwave assisted reverse micelle (MARM) and ultrasound assisted reverse micelle (UARM) methods. The products were characterized utilizing XRD, SEM, TGA/DSC, BET, and FT‐IR analyses. Based on the results, the samples synthesized by MARM had uniform size distribution, high thermal stability, and significant surface area. Calculations using DFT/B3LYP indicated that the compounds have a tendency to the polymeric form, which could theoretically confirm the formation of Th‐MOF. Results of analysis of variance (ANOVA) showed that synthesis parameters played a critical role in the manufacturing of products with distinctive properties. Response surface methodology (RSM) predicted the possibility of creating Th‐MOF adsorbents with the surface area of 2579 m²/g, which was a considerable value in comparison with the properties of other adsorbents. Adsorption studies showed that, in the optimum conditions, the Th‐MOF products had high adsorption capacity for CO and CH₄. It is believed that the synthesis protocol developed in the present study and the systematic studies conducted on the samples which lead to products with ideal adsorption properties.     

Expected reliability of communication protocols

We consider the problem of sending a message from a sender $s$ to a receiver $r$ through an unreliable network by specifying in a protocol what each vertex is supposed to do if it receives the message from one of its neighbors. A protocol for routing a message in such a graph is finite if it never floods $r$ with an infinite number of copies of the message. The expected reliability of a given protocol is the probability that a message sent from $s$ reaches $r$ when the edges of the network fail independently with probability $1?p$.We discuss, for given networks, the properties of finite protocols with maximum expected reliability in the case when $p$ is close to 0 or 1, and we describe networks for which no one protocol is optimal for all values of $p$. In general, finding an optimal protocol for a given network and fixed probability is challenging and many open problems remain.     

New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

Synthesis of Highly Functionalized N,N-Diarylamides by an Anodic C,N-Coupling Reaction

We report an innovative, sustainable and straightforward protocol for the synthesis of N,N-diarylamides equipped with nonprotected hydroxyl groups by using electrosynthesis. The concept allows the application of various substrates furnishing diarylamides with yields up to 57 % within a single and direct electrolytic protocol. The method is thereby easy to conduct in an undivided cell with constant current conditions offering a versatile and short-cut alternative to conventional pathways.     

Kinetics and mechanism of trichloroisocyanuric acid/NaNO2-triggered nitration of aromatic compounds under acid-free and Vilsmeier-Haack conditions

Kinetics and mechanism of nitration of aromatic compounds using trichloroisocyanuric acid (TCCA)/NaNO₂, TCCA-N,N-dimethyl formamide (TCCA-DMF)/NaNO₂, and TCCA-N,N-dimethyl acetamide (TCCA-DMA)/NaNO₂ under acid-free and Vilsmeier-Haack conditions. Reactions followed second-order kinetics with a first-order dependence on [Phenol] and [Nitrating agent] ([TCCA], [(TCCA-DMF)], or [(TCCA-DMA)] >> [NaNO₂]). Reaction rates accelerated with the introduction of electron-donating groups and retarded with electron-withdrawing groups, but did not fit well into the Hammett's theory of linear free energy relationship or its modified forms like Brown-Okamoto or Yukawa-Tsuno equations. Rate data were analyzed by Charton's multiple linear regression analysis. Isokinetic temperature (β) values, obtained from Exner's theory for different protocols, are 403.7 K (TCCA-NaNO₂), 365.8 K (TCCA-DMF)/NaNO₂, and 358 K (TCCA-DMA)/NaNO₂. These values are far above the experimental temperature range (303-323 K), indicating that the enthalpy factors are probably more important in controlling the reaction.     

Local boundedness of weak solutions to the Diffusive Wave Approximation of the Shallow Water equations

In this paper we prove that weak solutions to the Diffusive Wave Approximation of the Shallow Water equations

${?}_{t}u?\mathrm{?}?({(u?z)}^{\alpha }|\mathrm{?}u{|}^{\gamma ?1}\mathrm{?}u)=f$

are locally bounded. Here, u describes the height of the water, z is a given function that represents the land elevation and f is a source term accounting for evaporation, infiltration or rainfall.     

Data assimilation and pollution forecasting in Burgers' equation with model error function

This article presents a correction method for a better resolution of the problem of estimating and predicting pollution, governed by Burgers' equations. The originality of the method consists in the introduction of an error function into the system's equations of state to model uncertainty in the model. The initial conditions and diffusion coefficients, present in the equations for pollution and concentration, and also those in the model error equations, are estimated by solving a data assimilation problem. The efficiency of the correction method is compared with that produced by the traditional method without introduction of an error function.Three test cases are presented in this study in order to compare the performances of the proposed methods. In the first two tests, the reference is the analytical solution and the last test is formulated as part of the “twin experiment”.The numerical results obtained confirm the important role of the model error equation for improving the prediction capability of the system, in terms of both accuracy and speed of convergence.     

Pentapnictogen heterocyclic monoanions: Structure,stability, and aromaticity

Inorganic planar ring-shape molecules with 4n + 2 π electrons are always the focus of experimental synthesis and theoretical research due to their potential aromaticity and stability. In this work, the whole series of five-membered heterocycle monoanions X _nY_5-n⁻ (X, Y = group 15 elements; n = 1-4) were thoroughly investigated by means of density functional theory calculations. They all have large formation energies and HOMO-LUMO gap energies, suggesting the potential thermodynamic and kinetic stability. Their aromaticities are comparable to that of typical aromatic hydrocarbons. Their thermal stabilities were firmly established by the ab initio molecular dynamics simulations. As most of them are predicted for the first time, their various spectra were simulated for experimental characterization. Furthermore, we demonstrate that these five-membered cyclic anions can be employed as η⁵-ligand to construct novel all-inorganic metallocenes, which may serve as the building blocks of low-dimensional nanomaterials.     

Validation of a HPLC/MS method for simultaneous quantification of clonidine,morphine and its metabolites in human plasma

A high‐performance liquid chromatography–tandem mass spectrometry method was developed and validated for the simultaneous quantification of morphine, morphine's major metabolites morphine‐3‐glucuronide and morphine‐6‐glucuronide, and clonidine, to support the pharmacokinetic analysis of an ongoing double‐blinded randomized clinical trial that compares the use of morphine and clonidine in infants diagnosed with neonatal abstinence syndrome. Plasma samples were processed by solid‐phase extraction and separated on an Inertsil ODS‐3 (4 μm) column using an 0.1% formic acid in water–0.1% formic acid in methanol gradient. Detection of the analytes was conducted in the positive multiple reaction monitoring mode. The range of quantitation was 1–1000 ng/mL for morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide, and 0.25–100 ng/mL for clonidine. Intra‐day and inter‐day accuracy and precision were ≤15% for all analytes across the quantitation range. Extraction recovery rates were ≥94% for morphine, ≥90% for M3G, ≥87% for M6G and ≥ 79% for clonidine. Matrix effect ranged from 85–94% for clonidine to 101–106% for M3G. The method fulfilled all predetermined acceptance criteria and required only 100 μL of starting plasma volume. Furthermore, it was successfully applied to 30 clinical trial plasma samples.